MOFI4500-4GXeLTE-V3 Firmware Update Guide

• MOFI4500-4GXeLTE V3 (non sim)
• MOFI4500-4GXeLTE-SIM4 V3
• MOFI4500-4GXeLTE-SIM7 V3
• MOFI4500-4GXeLTE-SIM8 V3

Download Location: https://mofinetwork.com/4500v3-downloads/

File Format: bin file

Always verify MD5 checksum before installation

• ⚠️ IMPORTANT: Factory reset is highly recommended after firmware update
• Stable power connection
• Computer or device connected to router (WiFi or Ethernet)
• Downloaded firmware file saved to your computer

Step 1: Download Firmware

1. Download the firmware file from the download page
2. Save to your computer (do not open or extract)
3. Note the file location for later use

Step 2: Access Router Interface

1. Connect to the router via WiFi or Ethernet
2. Open a web browser
3. Navigate to: http://192.168.10.1
4. Login with your administrator credentials
5. default username is: root, default password is: admin

Step 3: Flash Firmware

1. Go to System → Manually Flash Firmware
2. Click Browse and select firmware file
3. Verify checksum matches the one provided with the download
4. Click Apply to start the update

Step 4: Monitor Update Process

1. Update process takes 5 minutes maximum
2. Watch the Power LED: During the update, the Power LED stays ON. When the router reboots, it will briefly go OFF, then start blinking. Once the router fully boots up, the LED will stop blinking and remain solid ON—indicating the update is complete.
3. Router will automatically reboot
4. When power LED becomes solid, update is complete

Step 5: Reconnect and Verify

1. Close browser and reopen
2. Navigate to http://192.168.10.1
3. Login to verify access
4. Go to Status → Overview to confirm firmware version

Step 6: Factory Reset (Recommended)

Method 1 - Via GUI:

1. Login to the router interface
2. Go to System → Factory Default
3. Click Perform Reset

Method 2 - Hard Reset:

1. Power cycle the router
2. When power LED is solid, press and hold reset button for 10 seconds
3. Release button and wait for router to restart

1. Run the Setup Wizard: Click the Setup Wizard in the top-right corner to begin guided configuration. During this process, you'll have the option to change the APN settings if required for your network.

2. Verify internet connectivity

• 2.6.3 Updated MOFI CLOUD Link Server List

Change logs:

• – 2.6.3 Updated Reconnection Scripts
• – 2.5.0 Updated MOFI CLOUD Servers
• – 2.4.0 Added Wireguard Server Support
• – 2.4.0 Support Bandlock and Reset Modem from ACS server
• – 2.4.0 Support Module Power Cycle Schedule
• – 2.4.0 Added Zerotier Support
• – 2.3.5 Add MOFI Wireguard Public IP WG5 server to list
• – 2.3.3 Updated Reconnection to prevent having to reboot
• – 2.3.1 Fix Mofi Family Shield (blocks porn and bad sites automatically) where it would not disable after it was enabled
• – 2.3.1 Fix Wireguard Issue when setting up on your own server
• – 2.2.9 GUI Menu Updated
• – 2.2.9 Updated OpenVPN Settings
• – 2.2.8 Added IPV6 Check box under Mofi Internal Modem
• – 2.2.8 Updated MOFI WebSite Blocker
• – 2.2.7 Fix IP Passthrough Issue
• – 2.2.6 Updated Block By MAC Filtering where you can automatically block your kids from the internet during selected time duration like bed time.
• – 2.2.6 Reduce Pings to save on “‘wasted” data use
• – 2.2.6 Fix Wireless Repeater Issue
• – 2.2.6 Added Public IP Super Fast MOFI Cloud Wireguard WG5 server to Cloudlink
• – 2.2.1 Corrected issue where if module was in WCDMA mode signal strength wouldn’t load this is corrected on the 7455 and the 7411
• – 2.2.0 Fix issue with Quectel module going in wrong mode
• – 2.1.9 Added Proton VPN Support under VPN Services
• – 2.1.9 Fixed issue where Description from ACS won’t save under Certain Conditions
• – 2.1.9 Updated ISP TTL FIX for Wireguard to set what the router is set to
• – 2.1.9 Fix bug where Wireguard was still setting routes even when disabled
• – 2.1.6 Fixed tty driver for access in Mofi Management to get to your router without a public IP
• – 2.1.6 Fixed Selected Band Lock button to clear all bands
• – 2.1.5 Fixed Signal Strength Display
• – Speed Band Lock
• – Mofi Wireguard VPN
• – Internet Speed Test via the router
• – More advanced bandwidth monitoring (just type usage/ in your browser)
• – More advanced remote management feature

• If you can't access the router after the update, perform a hard reset: Power OFF and ON the router, wait for the Power LED to turn solid, then press and hold the Reset button (on the back) until the Power LED turns OFF and begins flashing—this will restore factory settings.
• No internet connection: Verify APN settings and ISP TTL values
• Update fails: Verify checksum and re-download firmware